HOW TO USE LCD 16X2 ARDUINO

How To Use LCD 16x2 Arduino - Liquid Crystal Display: LCD 2x16 is a common tool used to display information in the form of writing, the value of sensor readings, or display the menu options.

Liquid Crystal Display (LCD 16x2)

 

Arduino: The programming language used to program the microcontroller, in this example for its software dayoo using the Arduino hardware version to 105.4 while its use Arduino Uno. Here's an example of a circuit schematic LCD - Arduino.

Lcd 16x2 data sheet are as follows:

Liquid Crystal Display (LCD 16x2) Datasheet

As for 16x2 LCD series are linked by Arduino are as follows:

Arduino and LCD 16x2 Circuit

Please make a series of LCD and arduino per drawing and description above. After completion of stringing all please open your Arduino program. and write the following code:

// call library:
#include <LiquidCrystal.h>

// initialization PORT that will be used
LiquidCrystal lcd(12, 11, 5, 4, 3, 2);

void setup() {
  // Setting LCD columns and rows:
  lcd.begin(16, 2);
  // A paper will be displayed.
  lcd.print("hello, world!");
}

void loop() {
  // set the cursor column 0, row 1
  // (note: count the rows start at 0):
  lcd.setCursor(0, 1);
  // featuring figures every 1000 milliseconds:
  lcd.print(millis()/1000);
}

after that the circuit is ready to run. so first off I wish you luck!

Related Posts:

Tweet