FUNCTION OF SWITCH MOST IDEAL

Function of switch most ideal - in the electrical installation, the switch is a component that serves as a liaison/breaker electric current flows. This switch is also used in the strong current, also used on the current weakness. This switch is generally selected materials from corrosion-resistant materials so its more efficient. actually the switch there are many types, but I will discuss about the single switch, switch and switch switch series only.

1. a single switch

Figure 1.1 a single switch

True to its name, this single switch can only be used to turn on or turn off a load only (can consist of more than or). in this case is a load of electric lamps or lighting.

2. Switch series

Figure 1.2 Switch series

This series has a switch point hyphen that connects the conducting phase and decide. This switch is normally used to connect and disconnect the phase conductor jointly, thus providing a more secure service to users.

This is the phase switch installation from a source directly into the middle of the terminal switch series. While both other terminal directly to the load or lamp lights 1 and 2. When are we going to put up the stop contact, then arusnya is taken directly from the source, as well as the neutral wire.

3. switch Exchange

Figure 1.3 Instalation of switch exchange

The switch is a switch that is to function as a liaison and current from the circuit a lamp or a bunch of loads of different places. for example, if we turn on the lights of A location, then the lights can also be switched off from location b. vice versa.

Related Posts:

Tweet