Electrolytic Capacitors are normally referred to as Elco Electrolyte Capacitor or capacitor is typically tubular, with two feet of berpolaritas positive (+) and negative (-). Positive and negative feet feet are distinguished with a one foot long berpolaritas positive (+), while the second toe is usually shorter or no sign--it means a negative (-) berpolaritas. In this series of electronics symbolized by the letter C.
 |
| ELECTROLYTIC CAPACITORS FUNCTIONS |
Electrolytic Capacitors in a circuit of the electronic functions as:
- Electricitystorage
- PEM-filter or a filter of current/voltage.
- As a clutch or liaison.
- Electric voltage stabilizer.
Electrolytic Capacitors components can also be damaged, if the damages are not in the know and elco then erupted to test it we can use avometer. How to use connecting cables with avometer avo to the foot elco, if normal, elco needle on top of the avometer would point to land slowly then going down to a value of 0. When a component is damaged, then the elco needle on avometer cannot get down and keep going up to the top.
The value of the capacitance of a Capacitor Electrolyte determined using value microFarad (uF). These values usually stated directly on the body, in addition to the Elco microFarad Elco is also has a value of Voltage/Voltage singly. 47uF 25v/an example that the capacitor has value berart capacitance of 47microFarad and maximum voltage 25volt, be careful when there is a chain of electronics require a capacitor electrolytic 47uF 50v/registration for example, because we're nervous maybe in the electrical circuit scheme of reading we pair of 47uF 25v/Elco it will result in the Elco burst/explode. Better when it's looking for but did not receive similar 47uF/50v, there are for example above 50volt will it be better than less than the value of voltage on the circuit.
0 Response to "ELECTROLYTIC CAPACITORS FUNCTIONS"
Post a Comment